Advertisement
PARTS REQUIRED:
x2
BEGIN
Place bolt on OO in open position with bolt end 3/8" (0,8 cm) down from frame.
1
Bolt is open when loop is contacting base (Fig A).
2
Mark and pre-drill holes for screws. Install bolt with screws supplied.
Drill 5/16" (0,8 cm) hole deep enough for bolt to slide into.
3
Place bolt on OO in open position with bolt end 1/2" (1,3 cm) up from floor. Bolt is
open when loop is connecting base (Fig. B).
Mark and pre-drill holes for screws. Install bolt with screws supplied.
4
Drill 5/16" (0,8 cm) hole deep enough for bolt to slide into.
LEFT
DOOR
FINISH
Your spring bolts are now installed.
DOOR HARDWARE
x8
5/16" (0,8 cm) Drill Bit
3/4" (1,9 cm)
Fig. A
OPEN POSITION
spring is loose.
Fig. B
OPEN POSITION
spring is loose.
41
OVER DOOR
FRAME
OO
1" (2,5 cm)
Screws
Loop contacts
base
FLOOR
1/2"
(1,2 cm)
HINT: With door closed
extend bolt and tap with
hammer to leave a mark
in wood for drilling.
5/16" (0,8 cm)
drill for bolt
1" (2,5 cm) deep.
3/8" (0,8 cm)
with bolt
in open
position.
PRE-DRILL (4)
HOLES Install
3/4" (1,9 cm)
Screws
Loop contacts
base
OO
PRE-DRILL (4)
HOLES Install
3/4" (1,9 cm)
Screws
Advertisement
