Handy Home Products Meridian 8' x 12' Gable 16698 Assembly Manual page 34

PARTS REQUIRED:
x12
x14
TZA
2 x 4 x 55-9/16" (5,1 x 10,2 x 141,1 cm)
BEGIN
1
Place (2) rafters TZA on top of temporary support AL and flush to inside of 12' eave wall panels.
Place gusset on top of rafters with 1/4" (19 mm) offset (Fig. A).
Fasten gusset to rafters with (12) 2" nails in pattern shown.
2 For (2) rafters install (1) gusset and set aside. (Fig. B).
For (5) rafters, flip over assembled rafter and install a second gusset (Fig. C).
Flush
to panel
1/4"
(1,9 cm)
Fig. B -
Build 2
FINISH
Your rafters are now assembled.
You will build 7 rafter assemblies.
Fit base of rafter flush to back wall studs
1/4"
(1,9 cm)
Flush at peak.
Fig. A
96"
(243,8 cm)
RAFTERS
Temporary Support
AL
x1
2 x 4 x 7"
(5,1 x 10,2 x 17,8 cm)
96"
(243,8 cm)
and wall panels.
AL
Temporary Support
Fig. C -
32
x144
2" (5,1 cm)
TZA
HINT:
Use floor and walls to help
assemble rafters!
Build 5
96"
(243,8 cm)
Flush
to panel