Device Care - Hartmann Veroval Compact BPU 22 Instructions For Use Manual

Upper arm blood pressure monitor
Hide thumbs Also See for Veroval Compact BPU 22:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Error that has
occurred
Implausible measured
values
Switch the device off if an error symbol appears. Check for all possible causes and note the instructions for self-measurement from Chapter 2
'Important information'. Relax for a minute and then take the measurement again.

8. Device care

Only ever use a soft, damp cloth to clean the device. Please do not
use thinner, alcohol, detergents or solvents.
The cuff can be cleaned carefully using a slightly damp cloth and
mild soap solution. Do not completely immerse the cuff in water.
Possible causes
There is a system error.
Inflation pressure is higher than
300 mmHg.
The batteries are almost empty.
Implausible measured values often occur due to
inappropriate handling of the device or mistakes
during the measuring procedure.
Remedy
Contact customer service if this error message appears.
Please rest for at least 1 minute and take the measurement
again.
Replace batteries.
Please observe Chapter 5 'Measuring your blood pressure'
as well as the safety information. Then repeat the measure-
ment.
It is recommended to clean and disinfect the cuff regularly or
after each use, especially when used by several users, to prevent
infection. The cuff should be disinfected, particularly on the inside,
by wiping with a disinfectant. Use a disinfectant that is compatible
with the cuff materials, e.g. 75% ethanol or isopropyl alcohol.
To protect from external influences, keep the device, the cuff and
these instructions in the storage bag.
17
English
EN

Advertisement

Table of Contents
loading

Table of Contents