Measuring Your Blood Pressure - Hartmann Veroval Compact BPU 22 Instructions For Use Manual

Setting the date and time
Be sure to set the date and time correctly. This is the only way
to save your measured values correctly with date and time for
subsequent retrieval.
To switch to setting mode, reinsert the batteries or hold the START/
STOP button down for 5 seconds. Proceed as follows:
Hours
The hour format flashes on the display.
• Select the desired hour format using the
Save buttons / and confirm using the
START / STOP button
Date
The display shows the year (a), the month (b)
and the day (c).
• Depending on the display, use the Save
buttons / to select the year, the
month or the day and confirm using the
START / STOP button
If the 12-hour format is selected, the
month is displayed before the day.
.
.
Time
The hour (d) and the minutes (e) flash conse-
cutively on the display.
• Depending on the display, use the Save
buttons /
or minutes and confirm using the START /
STOP button
The device switches off automatically once all data
has been set.

5. Measuring your blood pressure

Application of the cuff
Before applying the cuff, insert the cuff socket into the connector
socket on the left side of the device.
Do not mechanically constrict, compress or bend the sleeve tube.
(a)
The blood pressure must be measured on a bare upper arm. If
the cuff is completely open, thread the end of the cuff through
the metal ring to form a loop (see Fig. 1). Position the cuff on the
(b)
upper arm so that the lower edge is 2-3 cm above the crook of the
arm and above the artery (see Fig. 2). The tube points to the centre
of the palm.
(c)
11
to select the current hour
.
English
EN
(d)
(e)