Advertisement
Step 9
You will need
20 x Nails
Hammer
Align the Back Panel (P6) with the edges of the partially assembled unit.
Panel (P6) to Left,Right,Top&Bottom Panels (P1,P2,P3&P4) with 20 x Nails (H9) with the
the nails are evenly spaced out as shown an are placed approximately 5mm
Hammer.Ensure
from the edge of
Step 10
You will need
4 x Shelf Supports
(H6)
Insert 4 x Shelf Supports (H6) into Left & Right Side Panels (P1&P2) as shown at
your desired height. Place Ad ustable Shelf (P7) into the unit and rest on
shelf supports. Ensure the shelves are firmly secured.
fantasticfurniture.com.au
the back panel.
(P1)
j
(P2)
(H6 )
(H6 )
(H6 )
(H6 )
(P7)
Attach Back
(H6)
Page 9
Advertisement
