Advertisement
Step 5
You will need
6
x Cam Nuts
Phillips head
(H1)
screwdriver
Insert 6 x Cam Nuts (H1) into
as shown. Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Attach Top Panel (P3) to Left & Right Side Panels (P1&P2) and Support Panels (P5 x 2)
by tightening the cam nuts with the Phillips Head Screwdriver.
Step 6
You will need
4 x Screws
Phillips head
(H14 )
screwdriver
Attach Bottom Panel (P4) to Left & Right Side Panels (P1&P2) with 4 x Screws (H14) by
tightening with the Phillips Head Screwdriver.
(H1)
(H2)
(H1)
(P5)
(P2)
Left & Right Side Panels (P1&P2) and Support Panels (P5 x 2)
(P2)
E nsure the raw edge of top
panel is at the back of the unit
before securing
(H1)
(P3)
(H1)
(H1)
(P5)
E nsure the raw edge of bottom
panel is at the back of the unit
before securing
(P1)
(P4 )
(H14)
(H14)
(P1)
(H14)
(H14)
Page 7
Advertisement
