Advertisement
Step 3
You will need
6 x Cam Bolts
Phillips head
(H2)
screwdriver
Attach 6 x Cam Bolts (H2) to Top Panel (P3) by tightening with the Phillips Head Screwdriver.
Step 4
You will need
4 x Cam Nuts
Phillips head
(H1)
screwdriver
Insert 4 x Cam Nuts (H1) into Support
point towards the incoming cam bolts. Attach Left & Right Side Panels (P1&P2) to Support
Panels (P5 x 2) by
fantasticfurniture.com.au
(H2)
(H2)
(H1)
(H1)
tightening the cam nuts with the Phillips Head Screwdriver.
(H2)
(P3)
(H2)
(H1)
(H2)
(H1)
(P5)
(P5)
(P2)
Panels (P5 x 2). Rotate the cam nuts so the arrows
(H2)
(H2)
(H2)
(P1)
E nsure the raw edges of side
panels and the cam nuts on the
support panels are all facing the
back of the unit before securing
Page 6
Advertisement
