Advertisement
TOP
(SEE SLIDE ASSEMBLY
INSTALLATION STEP FOR
TOP MOUNTING HOLE
DRILLING LOCATIONS).
TIP: PREBENDING THE ENDS WILL EASE ASSEMBLY.
10 FOOT SLIDE ASSEMBLY
PHASE 1
STEP 1
PLACE SLIDE BED SUPPORT CENTERED ON THE BOTTOM 1/2" FROM THE EDGE. TRANSFER HOLES
ON THE BOARD THROUGH THE SLIDE BED AS SHOWN BELOW. USE A 3/8" DRILL BIT.
ATTACH SLIDE BED SUPPORT TO SLIDE USING HARDWARE SHOWN.
NUT BARREL WH 5/16x5/8
WASHER LOCK EXT 12x19
ITEMS FOR PHASE 1
QTY
DESCRIPTION
1
SLIDE BED 10' LIGHT GREEN
1
SLIDE BED SUPPORT
3
BOLT WH 5/16x1/2
3
WASHER LOCK EXT 12x19
3
NUT BARREL WH 5/16x5/8
SLIDE BED 10' LIGHT GREEN
BOTTOM
M70
USE M70 SLIDE BRACE AS A TEMPLATE
FOR DRILLING BOTTOM HOLE PATTERN
IN SLIDE BED. BE SURE TO PLACE
SLIDE BRACE UP 1/2" FROM BOTTOM
EDGE OF SLIDE BED BEFORE MARKING
HOLE PATTERN.
LABEL
DX
M70
CM
AD
B
BOLT WH 5/16x1/2
Advertisement
