Summary of Contents for Backyard Discovery 1801318
Page 1
For the most up to date assembly manual, to register your set or to order replacement parts please visit www.backyarddiscovery.com Save this assembly manual for future reference in the event that you need to order replacement parts. Made in China INS-1801318-A-EAGLES NEST-ENG 06/27/18...
Page 2
With Go Configure, we bring you 18 years of experience right to your doorstep. We service a wide array of indoor and outdoor recreation products that most consumers don’t have the time or ability to deliver & install themselves. We do the heavy lifting, so you don’t have to! •...
Page 3
STOP PARE Missing A Part? CALL US BEFORE GOING BACK TO THE STORE! The store where you made your purchase does not stock parts for this item. If you have assembly questions or if you need parts, whether they are missing or damaged Call Toll-Free Help Line or visit www.backyarddiscovery.com ¡LLÁMENOS ANTES DE REGRESAR A LA TIENDA! La enda donde realizó...
Page 4
Owner’s Manual Play House Dear Customer: Please read entire booklet completely before beginning the assembly process. Equipment is recommended for use by children 3 to 10 years of age. Structures are not intended for public use. The Company does not warranty any of its residential structures subjected to commercial use such as: Daycare, Preschool, Nursery School, Recreational Park, or any similar Commercial Application.
Page 5
Owner’s Manual Play House Please refer to the Assembly section of the Assembly Manual for Maximum Fall Height. Positioning Your Play house 1. The Play house is designed to be installed on a level surface by an Adult with an Adult helper.
Page 6
Owner’s Manual Play House The following chart explains the fall height in feet from which a life threatening head injury would not be expected Critical Heights in feet (m) of Tested Materials Material Uncompressed Depth Compressed Depth 6" (152mm) 9" (228mm) 12"...
Page 7
Owner’s Manual Play House Check all protective coverings on bolts, pipes, edges and corners. Replace if • they are loose, cracked, or missing. Check all moving parts including swing seats, ropes, cables, and chains for wear, • rust, or other deterioration. Replace as needed. Check metal parts for rust.
Page 8
Owner’s Manual Play House Owners shall be responsible for maintaining the legibility of the warning labels. Disposal Instructions: When the Play house use is no longer desired, it should be disassembled and disposed of in such a way that no unreasonable hazards will exist at the time the unit is discarded.
Page 9
Owner’s Manual Play House APPENDIX A Information on Playground Surfacing Materials: The following information is from the United States Consumer Product Safety Commission’s Information Sheet for playground surfacing material; also see the following website for additional information:. www.cpsc.gov/cpscpub/pubs/323.html X3. CONSUMER INFORMATION SHEET FOR PLAYGROUND SURFACING MATERIALS X3.1 Select Protective Surfacing—One of the most important things you can do to reduce the likelihood of serious head injuries is to install shock-absorbing protective surfacing under and around your play equipment.
Page 10
Owner’s Manual Play House This information has been extracted from the CPSC publications “Playground Surfacing — Technical Information Guide” and “Handbook for Public Playground Safety.” Copies of these reports can be obtained by sending a postcard to: Office of Public Affairs, U.S. Consumer Product Safety Commission, Washington, D.C., 20207 or call the toll-free hotline: 1- 800-638-2772.
Page 11
Play House Assembly Manual FAQs: 1. Does the area for the play house need to be level? Yes. Backyard Discovery recommends the play house be positioned on a flat level area for maximum safety and durability. Any stakes provided should be used to secure it firmly to the ground.
Page 12
Tools Required for Installation: (These are the tools that are generally required for assembly of our outdoor products. These tools are not included with the outdoor product purchase.) (Level 24") (Square) (Open End Wrenches 1/2") (Phillips Screw Driver) (Claw Hammer) (Tape Measure) (Rubber Mallet - Optional) (3/8"...
Page 13
SAFETY AND ASSEMBLY INFORMATION SELECTING THE CORRECT LOCATION FOR YOUR PLAY PRODUCT IS IMPORTANT FOR YOUR CHILDREN’S SAFETY AND THE PRODUCT’S LONGEVITY Dimensions: General Information: • The Eagles Nest has one layout option. Your set has been designed and engineered for Layout Ground Dimension Safe Play Area*...
Page 14
Parts Identification Wood Components (NOT TO SCALE) B1 - POST - W4L08453 3"x3"x59" (76x76x1500) B2 - POST - W4L08454 3"x3"x59" (76x76x1500) B3 - POST - W4L08473 3"x3"x69 1/8" (76x76x1757) B4 - POST - W2A02257 3"x3"x59" (76x76x1500) B5 - POST - W4L08451 3"x3"x69 3/4"...
Page 15
Parts Identification Wood Components (NOT TO SCALE) B15 - POST - W4L08552 3"x3"x53 7/8" (76x76x1370) B16 - POST - W4L08553 3"x3"x53 7/8" (76x76x1370) B17 - POST - W4L08696 3"x3"x33 7/8" (76x76x860) B18 - POST - W4L08711 3"x3"x33 7/8" (76x76x860) B19 - POST - W4L08712 3"x3"x33 7/8"...
Page 16
Parts Identification Wood Components (NOT TO SCALE) F2 - POST - W4L08503 1 3/8"x2 3/8"x47 1/4" (36x60x1200) F3 - POST - W4L08504 1 3/8"x2 3/8"x47 1/4" (36x60x1200) F5 - PICNIC TABLE OUTER SUPPORT - W4L08555 1 3/8"x2 3/8"x16 3/4" (36x60x424) F6 - PICNIC TABLE LEG - W4L08556 1 3/8"x2 3/8"x29 7/8"...
Page 17
Parts Identification Wood Components (NOT TO SCALE) G6 - WALL SUPPORT - W4L08465 1"x5 1/4"x53 5/8" (24x134x1362) G7 - WALL SUPPORT - W4L08477 1"x5 1/4"x36" (24x134x915) G8 - WALL SUPPORT - W4L08478 1"x5 1/4"x32" (24x134x813) G10 - WALL SUPPORT - W4L08481 1"x5 1/4"x36"...
Page 33
Parts Identification Accessories (NOT TO SCALE) FX - HAND GRIP METAL GREEN 381 c/c - A100118 - "A" REVISION TAG - A100314 - BYD ID TAG (MEDIUM) WITH AGES - A100175 - 90° L-BRACKET - BLK - A4M00555 QU - SLIDE VF 10 FT - A100287 - L BRACKET 2.5x38x50x55 BLK - A4M00615 - TRIANGLE BRACE 100x200x12ga - BLK - A4M00827 - METAL ROOF FULL RIB - A4M00842...
Page 34
Parts Identification Accessories (NOT TO SCALE) (2) -TURRET WALL ARCH BAND - A4M00880 (1) -TURRET WALL ARCH BAND - A4M00907 (2) -QUARTER ROUND TURRET FLOOR SUPPORT - A4M00881 (1) -QUARTER ROUND TURRET FLOOR SUPPORT - A4M00883 (1) -TURRET WALL ARCH BAND - A4M00896 (2) -QUARTER ROUND TURRET FLOOR SUPPORT - A4M00897...
Page 35
Parts Identification Accessories (NOT TO SCALE) - ROUND ROOF PLASTIC CAP - A6P00239 - SOLAR LIGHT - A6P00272 KC - METAL GROUND STAKE BROWN - A100178...
Page 42
G4 - CROSS BRACE - W4L08463 1"x5 1/4"x81 7/8" (24x134x2081) STEP 2 IT IS RECOMMENDED THAT YOU PLACE ALL T-NUTS BEFORE YOU BEGIN ASSEMBLY OF T-NUT 5/16 PARTS (10) BOLT WH 5/16x1 BLK BOLT WH 5/16x1 3/4 WASHER (10) LOCK EXT 8x19 BLK IT IS RECOMMENDED THAT YOU SQUARE THE ASSEMBLY...
Page 44
H23 - FLOOR SUPPORT - W4L08569 H27 - FLOOR SUPPORT - W4L08701 STEP 4 SCREW PFH 8x2 BLK SCREW PFH 8X2 BLK (2 PLCS) 10 3/4 in [273 mm] NOTE HOLE LAYOUT FOR PROPER ASSEMBLY 1 1/2 in [38 mm]...
Page 45
G3 - WALL SUPPORT - W4L08461 1"x5 1/4"x88 1/2" (24x134x2249) K3 - BASE BOARD - W4L08457 1"x5 1/4"x89 1/2" (24x134x2274) B6 - POST - W4L08452 3"x3"x59" (76x76x1500) B4 - POST - W2A02257 3"x3"x59" (76x76x1500) STEP 5 IT IS RECOMMENDED THAT YOU PLACE ALL WASHER T-NUTS BEFORE YOU BEGIN ASSEMBLY OF LOCK EXT...
Page 46
E1 - ANGLE SUPPORT - W4L08458 1 3/8"x3 3/8"x18 3/4" (36x86x475) STEP 6 IT IS RECOMMENDED THAT YOU PLACE ALL WASHER T-NUTS BEFORE YOU BEGIN ASSEMBLY OF LOCK EXT 8x19 BLK PARTS LAG SCREW WH 5/16x2 BOLT WH 5/16x2-1/4 T-NUT 5/16 T-NUT 5/16 BLK (2 PLCS) LAG SCREW WH 5/16x2 BLK...
Page 47
E1 - ANGLE SUPPORT - W4L08458 H8 - ANGLE BRACE - W4L08494 G4 - CROSS BRACE - W4L08463 1 3/8"x3 3/8"x18 3/4" (36x86x475) 1 3/8"x3 3/8"x38 1/2" (36x86x978) 1"x5 1/4"x81 7/8" (24x134x2081) STEP 7 IT IS RECOMMENDED THAT YOU PLACE ALL T-NUTS BEFORE YOU BEGIN ASSEMBLY OF BOLT WH PARTS...
Page 52
B2 - POST - W4L08454 H1 - FLOOR SUPPORT - W4L08462 3"x3"x59" (76x76x1500) 1"x3 3/8"x54 1/2" (24x86x1384) L BRACKET 2.5x38x50x55 K2 - BASE BOARD - W4L08456 1"x5 1/4"x79 1/4" (24x134x2014) STEP 12 IT IS RECOMMENDED THAT YOU PLACE ALL T-NUTS BEFORE YOU BEGIN ASSEMBLY OF T-NUT 5/16 PARTS WASHER...
Page 53
H8 - ANGLE BRACE - W4L08494 E1 - ANGLE SUPPORT - W4L08458 1 3/8"x3 3/8"x38 1/2" (36x86x978) 1 3/8"x3 3/8"x18 3/4" (36x86x475) STEP 13 IT IS RECOMMENDED THAT YOU PLACE ALL T-NUT 5/16 T-NUTS BEFORE YOU BEGIN ASSEMBLY OF PARTS WASHER LOCK EXT 8x19 BLK...
Page 56
B7 - POST - W4L08472 G5 - WALL SUPPORT - W4L08464 3"x3"x58" (76x76x1472) 1"x5 1/4"x26 3/4" (24x134x681) G6 - WALL SUPPORT - W4L08465 B3 - POST - W4L08473 1"x5 1/4"x53 5/8" (24x134x1362) 3"x3"x69 1/8" (76x76x1757) STEP 16 IT IS RECOMMENDED THAT YOU PLACE ALL WASHER T-NUTS BEFORE YOU BEGIN ASSEMBLY OF BOLT WH...
Page 57
T2 - FLOOR SUPPORT - W4L08467 H20 - FLOOR SUPPORT - W4L08562 1"x1 3/8"x22 5/8" (24x34x576) 1"x2 3/4"x3" (24x70x76) STEP 17 SCREW PFH 8x2 BLK 54 1/2 in [1386 mm] LOCATION TO TOP OF FLOOR SUPPORT SCREW PFH 8x2 BLK (8 PLCS)
Page 59
H3 - FLOOR SUPPORT - W4L08469 H22 - GUARD RAIL - W4L08565 1"x3 3/8"x26 3/4" (24x86x681) 1"x3 3/8"x26 3/4" (24x86x681) H34 - FLOOR SUPPORT - W4L08743 H4 - FLOOR SUPPORT - W4L08474 1"x2 3/4"x24 7/8" (24x70x631) 1"x3 3/8"x24 7/8" (24x86x631) STEP 19 IT IS RECOMMENDED THAT YOU PLACE ALL T-NUTS BEFORE YOU BEGIN ASSEMBLY OF...
Page 60
STEP 20 WASHER LOCK EXT 8x19 BLK LAG SCREW WH 5/16x2 LAG SCREW T-NUT 5/16 WH 5/16x3 BOLT WH 5/16x3 3/4 SUBASSEMBLIES FROM STEP 19 FRONT SAFETY BOARDS FROM STEP 19 T-NUT 5/16 BLK (1 PLC) FLOOR SUPPORTS FROM STEP 19 BOLT WH 5/16x3-3/4 BLK (4 PLCS) LAG SCREW WH 5/16x2 BLK...
Page 65
B15 - POST - W4L08552 H29 - GUARD RAIL - W4L08715 3"x3"x53 7/8" (76x76x1370) 1"x3 3/8"x9" (24x86x229) STEP 25 IT IS RECOMMENDED THAT YOU PLACE ALL WASHER T-NUTS BEFORE YOU BEGIN ASSEMBLY OF LOCK EXT PARTS 8x19 BLK T-NUT 5/16 BOLT WH 5/16x3 3/4 T-NUT 5/16 BLK...
Page 66
(1) 4 FT. LADDER ASSEMBLY STEP 26 IT IS RECOMMENDED THAT YOU PLACE ALL T-NUTS BEFORE YOU BEGIN ASSEMBLY OF PARTS WASHER LOCK EXT 8x19 BLK BOLT WH 5/16x2-1/2 WASHER LOCK EXT 8x19 BLK (2 PLCS) BOLT WH 5/16x2-1/2 BLK (2 PLCS)
Page 67
B13 - POST - W4L08523 3"x3"x53 7/8" (76x76x1370) B14 - POST - W4L08524 3"x3"x53 7/8" (76x76x1370) STEP 27 IT IS RECOMMENDED THAT YOU PLACE ALL T-NUTS BEFORE YOU BEGIN ASSEMBLY OF WASHER PARTS LOCK EXT 8x19 BLK T-NUT 5/16 BOLT WH 5/16x3 3/4 T-NUT 5/16 BLK NOTE HOLE...
Page 69
B9 - POST - W4L08476 E2 - POST - W4L08522 3"x3"x53 7/8" (76x76x1370) 3 3/8"x1 3/8"x53 7/8" (86x36x1370) STEP 29 IT IS RECOMMENDED THAT YOU PLACE ALL T-NUTS BEFORE YOU BEGIN ASSEMBLY OF WASHER LOCK EXT PARTS 8x19 BLK T-NUT 5/16 BLK (11 PLCS) BOLT WH WASHER LOCK EXT 8x19 BLK...
Page 70
B8 - POST - W4L08475 B16 - POST - W4L08553 3"x3"x53 7/8" (76x76x1370) 3"x3"x53 7/8" (76x76x1370) STEP 30 IT IS RECOMMENDED THAT YOU PLACE ALL T-NUTS BEFORE YOU BEGIN ASSEMBLY OF WASHER LOCK EXT PARTS 8x19 BLK LAG SCREW WH 5/16x2 T-NUT 5/16 BLK (12 PLCS) BOLT WH...
Page 71
G15 - WALL SUPPORT - W4L08545 G12 - WALL SUPPORT - W4L08490 1"x5 1/4"x30 1/4" (24x134x768) 1"x5 1/4"x29 1/8" (24x134x741) G16 - WALL SUPPORT - W4L08546 G13 - WALL SUPPORT - W4L08491 1"x5 1/4"x14 7/8" (24x134x378) 1"x5 1/4"x28 1/4" (24x134x716) STEP 31 IT IS RECOMMENDED THAT YOU PLACE ALL T-NUTS BEFORE YOU BEGIN ASSEMBLY OF...
Page 77
B10 - POST - W4L08484 3"x3"x47 1/4" (76x76x1201) G8 - WALL SUPPORT - W4L08478 B12 - POST - W4L08487 BOTTOM EDGE 1"x5 1/4"x32" (24x134x813) - BYD ID TAG (MEDIUM) WITH AGES - A100175 3"x3"x13 5/8" (76x76x345) STEP 37 WASHER IT IS RECOMMENDED THAT YOU PLACE ALL LOCK EXT T-NUTS BEFORE YOU BEGIN ASSEMBLY OF 8x19 BLK...
Page 78
H6 - FLOOR SUPPORT - W4L08482 H7 - FLOOR SUPPORT - W4L08483 1"x3 3/8"x32" (24x86x813) 1"x3 3/8"x26" (24x86x661) H20 - FLOOR SUPPORT - W4L08562 1"x2 3/4"x3" (24x70x76) STEP 38 SCREW PFH 8x1-1/2 BLK H20 BOARDS ARE MOUNTED FLUSH SCREW PFH 8x2 BLK TO THE TOP EDGE OF H7 BOARD.
Page 122
B17 - POST - W4L08696 B19 - POST - W4L08712 3"x3"x33 7/8" (76x76x860) 3"x3"x33 7/8" (76x76x860) STEP 82 IT IS RECOMMENDED THAT YOU PLACE ALL BOLT WH T-NUTS BEFORE YOU BEGIN ASSEMBLY OF 5/16x3 3/4 PARTS WASHER T-NUT 5/16 (14) LOCK EXT T-NUT 5/16 BLK WASHER LOCK EXT 8x19 BLK...
Page 135
FX - HAND GRIP METAL GREEN 381 c/c - A100118 STEP 95 T-NUT 5/16 BLK BOLT WH (2 PLCS) 5/16x1/2 BLK BOLT WH 5/16x1/2 BLK (2 PLCS) LAG SCREW WH 5/16x1 1/2 T-NUT 5/16 HAND GRIP METAL GREEN 381 c/c (2 PLCS) LAG SCREW WH 5/16x1 1/2 BLK (2 PLCS)
Page 136
FX - HAND GRIP METAL GREEN 381 c/c - A100118 STEP 96 LAG SCREW WH 5/16x1 1/2 LAG SCREW WH 5/16x1 1/2 BLK (6 PLCS) HAND GRIP METAL GREEN 381 c/c (3 PLCS)
Page 137
(1) 5 FT. ROCK WALL ASSEMBLY STEP 97 WASHER LOCK EXT 8x19 BLK BOLT WH T-NUT 5/16 5/16x2-1/2 REMOVE THIS BOARD TO ATTACH ROCKWALL TO PLAYHOUSE. BOLT WH 5/16x2-1/2 BLK (2 PLCS) WASHER LOCK EXT 8x19 BLK T-NUT 5/16 BLK (2 PLCS) (2 PLCS)
Page 138
- SOLAR LIGHT - A6P00272 STEP 98 SCREW PFH 6x5/8 BLK (2 PLCS) SCREW PFH 6x5/8 BLK SOLAR LIGHT (2 PLCS) CENTERED ON FRONT & BACK GABLES.
Page 144
TP2 - PICNIC TABLE SEAT - W2A02226 1 9/16"x6 3/4"x40 11/16" (40x172x1034) STEP 104 MAKE SURE THE TABLE IS PLACED OUTSIDE OF THE FALL ZONE; FOUND ON THE "SAFETY AND ASSEMBLY INFORMATION" PAGE OF THIS MANUAL. SCREW PFH (16) 8x1 3/4 BLK SCREW PFH 8X1-3/4 BLK (16 PLCS) FINAL STEP...
Page 145
Limited Warranty. In addition, Backyard Discovery will replace any parts within the first 30 days from date of purchase found to be missing from or damaged in the original packaging.