Advertisement
STEP 3
PLACE (1) SLIDE RAIL ASSEMBLY ON A FLAT SURFACE AND BEGIN INSERTING SLIDE BED AT THE BOTTOM OF THE SLIDE RAIL (FIG. 1). PUT
SLIDE BED SUPPORT INTO THE SUPPORT POCKET AT THE BOTTOM OF THE RAIL AND HAVE A HELPER BEND THE SLIDE BED TOWARDS THE
TOP OF THE SLIDE AND INSERT THE BED INTO THE SLIDE CAVITY. MAKE SURE SLIDE BED IS COMPLETELY DOWN IN THE SLIDE CAVITY.
INSTALL THE (4) SLIDE SUPPORT TUBES INTO THEIR RESPECTIVE PILOT LOCATIONS (FIG. 1).
PLACE THE OTHER SLIDE RAIL ASSEMBLY ON A FLAT SURFACE WITH THE SLIDE CAVITY UP. HAVE A HELPER HOLD THE TOP END OF THE SLIDE
BED AND BEGIN INSERTING THE SLIDE BED, SUPPORT TUBES, AND SUPPORT BOARD INTO THE CAVITY AND SUPPORT POCKETS STARTING AT
THE BOTTOM OF THE SLIDE AND WORKING UP TO THE TOP (FIG. 2).
10 FOOT SLIDE ASSEMBLY
PHASE 3
ITEMS FOR PHASE 3
QTY
DESCRIPTION
4
SLIDE SUPPORT TUBE 21.34x505
SLIDE SUPPORT TUBE 21.34x505
STOCK NUMBER
DW
Advertisement
