Quick Start Guide - Houghton BELAIRE H2000 Owner's Manual

● Switch on the power to the air-conditioner at the isolation breaker.
● Using the remote control , start the air-conditioner by pressing "
function by pressing the "MODE" button.
● Operate in low FAN, medium FAN and high FAN in turn to check normal operation.
● Select COOL mode, adjust the set point temperature to three degrees lower than the room temperature,
the unit will start to blow cool air after the compressor starts.
● Select HEAT mode, adjust the setting temperature to three degrees higher than the room temperature,
the unit will start to blow warm air after the compressor starts.
After selecting the COOL or HEAT mode, the compressor may delay starting
for 3 minutes. This is a feature to protect the compressor.

Quick Start Guide

Note
10
" button and then select fan