● Pull the air duct down until it engages with the
plenum mounting bracket. The duct connects to the
bracket with four catches that will clicks when
secure.
● When you have heard 4 clicks and the end of the
duct is firmly parallel to the top side of the bracket
then you have successfully connected.
Click
Loop
These two faces
are parallel
Installation of the plenum assembly
● Connect the socket and plug of the display panel
wires and the controller wires; please notice that
colors of the wires should be matching ( yellow to
yellow, red to red, etc ).
● Attach the plenum assembly to the plenum mounting
bracket by engaging the two parts. You will hear four
clicks to as the parts connect together.
8