ElectrIQ eiQ60touchslimhe User Manual page 8

4. Put the v-flaps and converter onto the hood, fix the expansion pipe (not supplied)
with cable tie on the outlet.Then hang the hood on to the hook. See pic 3.
5. Fix the outside chimney bracket on the outside chimney with 2 pcs ST4*8mm
screws, and be sure that the inside chimney can be adjusted the height in it freely.
Afterwards, install chimneys on the cooker hood. Lay the expansion pipe to the wall
outlet. Fix the expansion pipe with the cable tie on the wall-outlet .See Pic4.
6. Adjust the height of the inside chimney to the position of the inside chimney bracket
and fix on it by 2pcs ST4*8 screws. See Pic 5.
8