Connections; Aquamaster3 Sensor Connections (Remote Or Close-Coupled Only) - ABB AquaMaster 3 FET200 User Manual

AquaMaster 3 FET200
Electromagnetic flowmeter

3.2 Connections

3.2.1 AquaMaster3 Sensor Connections (Remote or Close-Coupled only)

Referring to Fig. 3.5:
1. Remove the screwed cap
2. Gently push the sensor plug
locking ring.
Note. If the sensor cable is terminated with fly leads, connection is via a sensor cable adapter box
(part number WABC2035 available separately).
Fig. 3.5 Sensor Connections
18
A
on the sensor connector.
B into the socket and rotate it until it engages, then tighten the
A
B
OI/FET200–EN Rev. N