RSTi-OM User Manual
GFK-3212A
Parameter Configuration
Use the following information to configure IO-Link port module parameters.
1. Double-click an IO-Link Port module to navigate for various settings.
Figure 24: Parameter Configuration
2. Navigate to the Settings tab
The PDI / PDO data is mapped to internal PLC memory. In the above screenshot, slot 1 is configured
for IO-Link In/Out 4 bytes. The equivalent AI/AQ memory is mapped along with the required length.
3. Navigate to the IO-Link Port Config tab.
Figure 25: IO-Link Port Config
4. Navigate to the Data Storage Config tab.
Figure 26: Data Storage Config
Configuring
Section 3
Jun 2021
32