Table of Contents
Advertisement
RSTi-OM User Manual
GFK-3212A
Section 3:
Machine Edition
3.1
Overview
PROFINET IO configuration procedures vary between software versions but the following configuration
steps are required in all cases. Refer to your PAC Machine Edition documentation if you require step-
by-step procedures.
1. Download, unzip, and upload the GSD file for the IO-Link Master (IOLM) (Section 3.2)
2. Insert the IOLM in the PROFINET IO system (Section 3.3)
3. Configure the IP address for the IOLM (Section 3.4)
4. Assign the PROFINET Device Nam (Section 3.5)
5. Set the IO Device Update Time (Section 3.6)
6. Configure the IO-Link port (Section 3.7)
7. Configure EPXPNS001/EPXPNS101modules. (See Section 8.2 in GFK-2958, PACSystems RSTi-
8. Use Section 11: Modbus/TCP Interface to complete configuration after attaching the IO-Link
Configuring
Configuring the IOLM with PAC
a.
Configure IO-Link port modules.
Configure port status modules.
b.
c.
If desired, configure data storage, automatic or manual - upload or download.
If desired, configure device validation and data validation.
d.
EP User Manual.) (If desired or required.)
devices.
Section 3
Jun 2021
15
Advertisement
Table of Contents
