Iolm Configuration - Emerson RSTi-OM Quick Start Manual

IOLM Configuration

The following is a checklist for configuration and setup of the IO-Link Master
module and the PROFINET IO (PNIO) and Modbus/TCP.
1. Adding the IOLM to the controller.
2. Configure the IP address for the IOLM.
3. Assign the PROFINET Device Name.
4. Set the IO Device Update Time.
5. Configure the IO-Link ports.
6. Configure the IO-Link input device for PROFINET on the PLC.
Note: The following pages will provide a brief description of configuring the
module with a PROFINET controller. For more detailed information on
configuration over Modbus TCP, OPC-UA or MQTT, please consult GFK-
3212, RSTi-OM User Manual.
16 IO-LINK Master W/ PROFINET and Modbus Quick Start Guide GFK-3213A