Section 11: Profinet Io Reference Information; Read Pdi Data Of Io-Link Device In Plc - Emerson RSTi-OM User Manual

RSTi-OM User Manual
GFK-3212A
Section 10:
10.1

Read PDI Data of IO-Link Device in PLC

This section demonstrates how to configure the IO-Link input device on the PLC.
Figure 84: IO-Link Device Configuration in PLC
The IO-Link device, which supports 2 bytes of PDI data, is connected to IO-Link Port 5. The PDI data is
mapped into the process image at address %AI00001, as shown in the figure above. The IO controller
could read the current PDI data from the IO-Link device at %AI00001.
PROFINET IO Reference Information
PROFINET IO Reference Information
Section 10
Jun 2021
102