Setting The Panel Type; First Commissioning - Siemens SIMATIC HMI IPC577C Operating Instructions Manual

Operating Instructions (compact)
1.9 Commissioning
1.9.4

Setting the panel type

1.9.4.1

First commissioning

First commissioning
● The "SIMATIC PC Wizard" program is automatically started once during commissioning.
● The "SIMATIC PC Wizard" implements the specific settings for the Panel PC during the
● Several dialogs appear on screen during the commissioning of the SIMATIC PC.
Procedure
Device-specific drivers are set during the hardware detection and configuration phase.
The type of SIMATIC PC is selected and detected automatically.
28
initial startup of the operating system.
NOTICE
Start the PC for commissioning in an unchanged factory state and follow the dialogs
until their conclusion.
Operating Instructions (Compact), 05/2009, A5E02368077-01
SIMATIC HMI IPC577C