Edit Sequence List; New Step; Copy Step - ETC echoflex ElahoTouch User Manual

parameters are included in the recording by pressing the Include Options button.
channels:
Active: Only channels with an intensity above zero are included.
•
Selected: Only channels currently selected (surrounded by a green box on the
•
map or brightly lit on the bumps) are included.
All: All channels are included.
•
Include:
Intensity / Color: Only the intensity and color mixing channels are included.
•
Position: Only the position (pan/tilt) channels are included.
•
Beam: Only the beam channels are included (beam includes non-fadable colors such as
•
wheels and scrollers).

Edit Sequence List

When record is used for an already created sequence, you will enter the Sequence List editor
where you can change the content of a
Here you may change the step names and fade times. Using the Edit Step button, you may
change the content of the steps. Pick the step you want to edit in the sequence list in the upper
part of the display. You can also insert
Press Exit to leave the editing mode. Any changes made will be stored in the selected sequence.

New Step

Inserts a new sequence step. The new step is added to the next free whole-numbered step at
the end of the sequence list. The new step may then be given another number, including a
fractional or 'point' number.
For example, to insert a step between steps 4 and 5, you would enter 4.5.
Note:
The sequence list

Copy Step

Copies the selected step and creates a new step. The new step is added to the next free whole-
numbered step at the end of the sequence list. The new step may then be given another
number, including a fractional or 'point' number.
For example, to insert a step between steps 4 and 5, you would enter 4.5.
27
sequence
new steps,
is not re-numbered when a step is inserted.
list.
copy steps, delete steps, and
channel
edit steps.
ElahoTouch User Manual