Switching The Hob Off; Protection Features - Hanseatic MC-IF7127B2C-A User Manual

Switching the hob off

- -
H
H
- -
H H
• To switch the entire hob off, touch the On/
Off sensor (9).
An acoustic signal will sound. All light indi-
cators, except for the flashing residual heat
indicators " ", will go out.
H

Protection features

The hob has a range of protection settings
that warn of danger and protect the appliance
from damage.
Residual heat display
During cooking, the heat from the pot is trans-
ferred to the glass ceramic and the cooking
zone/area becomes hot. If you switch off the
cooking zone/area or the entire hob, the re-
sidual heat indicator " " appears in the heat
H
setting display of a cooking zone/area that is
still hot.
If the temperature of the cooking zone/area
falls below a specific value, the residual heat
indicator " " will stop illuminating.
H
Automatic power reduction
The temperature of the electronic elements
inside the hob are constantly monitored. If the
heat increases too much, the hob is automat-
ically switched off.
Cooking zones/areas and sensors
(9)
Page EN-17