Cooking Zones/Areas And Sensors; Cooking Zone/Areas Data; Pot Recognition; Switching The Hob On - Hanseatic MC-IF7222H1CC User Manual

Page GB-12

Cooking zones/areas and sensors

Cooking zones/areas and sensors
The hob has 2 cooking areas, whereby both
cooking areas care divided into 2 separate
cooking zones. A sensor in the sensor field (7)
is assigned to each cooking area/zone.
Always activate the sensors with your
entire fi ngertip, not just the very end of
the fi nger. Your fi nger and the sensors must
be clean and dry for the sensors to function
properly. The sensors may not be covered
by objects.
Each time the sensor registers a touch,
you will hear an acoustic signal.

Cooking zone/areas data

( P a r -
t i a l ) Cookware di-
c o o k - ameter/dimen-
i n g sions
area
140-210 mm
220-400 mm

Pot recognition

Pot recognition is installed in the cooking
zones/areas. Pot recognition ensures that
the cooking zone/area will be activated only
if there is a pot with a ferromagnetic base
or another object made of the same kind of
metal located there. The cooking zone/area
becomes inactive as soon as the pot or the
magnetic object is removed.

Switching the hob on

• To switch the hob on, touch the on/off
ing the hob on, the hob will switch off auto-
matically.
Max. heat out-
put
Switching on/selecting
cooking zones/areas
1800/3000 W
1. Place a suitable pot or roasting pan on
3000/4000 W
2. Touch the corresponding cooking zone/
3. Set the heat setting of the cooking zone/
00
ϱ ^
u
(9)
sensor (20).
You will hear an acoustic signal.
All cooking zone/area sensors light up.
The timer sensor (9) displays the reading
00.
If you do not touch a sensor or do not
place suitable cookware on the cooking
zone/area within one minute of switch-
the desired cooking zone/area (e.g. front
left).
Make sure that the base of the cookware
and the cooking zone/area are clean and
dry.
00 0
^
(11)
area sensor (in this case: front left (11)).
The heat setting in the cooking zone/area
sensor lights up and flashes (in this case
the reading shows "0" i.e. no heat output).
00
4
^
(11) (14)
area with the slider sensor (14).
^ ϱ
u
(20)
^
u
^
u