Renishaw RLP40 Quick Start Manual page 27

Partnering mode
Partnering successful,
Partnering Partnering
mode off mode on
20 seconds probe in standby
After 8 seconds
120 seconds,
probe in standby
Return to "Switch-on method"
New settings
complete,
probe in standby
NOTES:
If using "Multiple probe mode" , refer to the RMI-Q radio machine interface installation guide (Renishaw part no. H-5687-8504).
Further probes require the same "Multiple probe mode" setting, but there is no need to be partnered with the RMI-Q.
To partner an RLP40 with an RMI-Q see RLP40 – RMI-Q partnership. Once partnering has been successful, the RLP40 will revert to
"Partnering mode off".
27