Renishaw RLP40 Quick Start Manual page 17

Whilst the "Battery status" is being displayed, deflect and release the
stylus to enter "Partnering mode off". Probe status will flash red to
acknowledge this.
Battery status
Battery good Battery low
or
At this point turn on either the RMI-Q or RMI-QE.
With RMI-Q switched on
After 8
Partnering mode
seconds
Partnering mode off Partnering mode on
Partnering
successful
RMI-Q
20 seconds probe in standby
120 seconds probe in standby
If partnering is unsuccessful "Partnering mode off" will be displayed again after 8 seconds.
Deflect the stylus for less than 4 seconds to select "Partnering mode on" again.
Or for RMI-QE see next page
17