Renishaw RLP40 Quick Start Manual page 26

120 seconds,
probe in standby
On
30 s
Stop triggering here, unless "Multiple probe mode" is required, in which
Mode off
If no changes are made in "Multiple probe mode", then deflecting the stylus for more than 4 seconds will return the
probe settings to beginning of the Trigger Logic menu. If "Multiple probe mode" is selected, proceed to "Partnering
26
Partnering mode
Partnering
mode off
After 8 seconds
Hibernation mode setting ("radio on"only)
On
5 s
case deflect the stylus for more than 4 seconds.
Multiple probe mode (omitted for "radio on")
(see "Multiple probe mode settings" to view all 16 choices)
Machine 1 Machine 2
mode" to repartner one probe with the RMI-Q.
Partnering
mode on
20 seconds probe in standby
Off
Mode on
Partnering successful,
Machine 16