Settings Wizard - Huawei UPS5000-E-30 kVA-FM User Manual

UPS5000-E-(30 kVA–120 kVA)-FM
User Manual
●
----End

4.1.2.2 Settings Wizard

Procedure
Step 1 Set the language, time and date, network parameters, system parameters, and
battery parameters on the Settings Wizard screen.
Set system parameters with caution because the settings determine whether the
UPS can operate normally.
● Set Single/Parallel after double check. Incorrect setting may affect the normal
● Output voltage level refers to the line voltage level. Set it based on site
● Set Output frequency correctly; otherwise, loads may be affected and the UPS
● Battery parameter settings are critical to battery maintenance, battery lifespan,
Issue 03 (2022-01-30)
Parameter
Port
Username
Password
c. Tap Power-on password activation and tap OK on the displayed screen
to complete the startup.
d. Complete and submit the startup report.
Offline activation
a. Tap Offline Activation to access the Offline Activation screen.
b. Enter the information obtained from the UPS LCD screen on the Offline
Activation screen and tap Generate PWD.
c. Enter the generated startup password in the Password text box on the
UPS LCD, and press Enter to start the UPS.
d. Complete and submit the startup report.
NO TICE
UPS operation.
requirements.
may not work properly.
and UPS discharge time.
Copyright © Huawei Technologies Co., Ltd.
Setting
443
admin
Changeme
4 Operations
90