Wi-Fi; Wi-Fi Settings; Setting General Parameters; Setting Ssid Profile - Huawei B593 Online Help Manual

Online Help

5.1 Wi-Fi Settings

This function enables you to configure the Wi-Fi parameters.

5.1.1 Setting General Parameters

To configure the general Wi-Fi settings, perform the following steps:
1. Choose Wi-Fi > Wi-Fi Settings.
2. In the General Settings area, set Wi-Fi to Enable.
3. Set Mode to one of the values described in the following table:
Parameter Value
802.11b/g
802.11g
802.11b
802.11b/g/n
4. Click Submit.
----End

5.1.2 Setting SSID Profile

After you configure the CPE on the SSID Profile page, the Wi-Fi client connects to the CPE
based on preset rules, improving access security.
To configure the CPE on the SSID Profile page, perform the following steps:
1. Choose Wi-Fi > Wi-Fi Settings.
2. Set SSID.
Description
The Wi-Fi client can connect to the CPE in 802.11b or 802.11g
mode.
The Wi-Fi client can connect to the CPE in 802.11g mode.
The Wi-Fi client can connect to the CPE in 802.11b mode.
The Wi-Fi client can connect to the CPE in 802.11b, 802.11g, or
802.11n mode. If the client connects to the CPE in 802.11n mode,
the Advanced Encryption Standard(AES) encryption mode is
required.
The SSID can contain 1 to 32 ASCII characters. It cannot be empty and the last
character cannot be a blank character. In addition, the SSID cannot contain the
following special characters: / ' = " \ &
The Wi-Fi client connects to the CPE using the found SSID.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd

5 Wi-Fi

5
Wi-Fi
15