Table of Contents
Advertisement
UPS5000-E-(30 kVA–120 kVA)-FM
User Manual
Figure 3-49 Positions to be checked for foreign matter
(1) Rear of modules
Figure 3-50 Filling a hole with sealing putty
(1) Paper protective film
Issue 03 (2022-01-30)
NO TE
1. In the scenarios where holes are drilled for routing cables or covers are removed for
routing cables, after routing cables and checking cable connections, use sealing putty to
fill in the gap between the cables and the cabinet.
2. After verifying the installation, reinstall all the covers.
3. Do not remove the dustproof cover before power-on to prevent dust inside the UPS, as
shown in
Figure
3-51.
(2) Cabinet top
Copyright © Huawei Technologies Co., Ltd.
(3) Wiring terminal
blocks
(2) Sealing putty
3 Installation
(4) Switches
86
Advertisement
Table of Contents
