Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Huawei WA8011V
Summary of Contents for Huawei WA8011V
- Page 1 WA8011V Quick Start Extend your home network in several steps! 31500AUR_01...
-
Page 2: Safety Information
Safety Information To use the device properly and safely, read the safety precautions carefully before using the device and strictly observe these precautions when using the device. Safety precautions: Store devices and accessories in temperature –10°C to +35°C and relative humidity 30%–85% RH for at most 9 months. - Page 3 Prevent objects, such as metal, from entering the device through the heat dissipation hole. Switch off the power and disconnect all cables, including the power cable, optical fiber, and network cable, during periods of lightning activities. The socket-outlet shall be installed near the power adapter and shall be easily accessible.
- Page 4 Appearance 2.4G/5G antenna 3-segment indicators Power plug Reset button WPS button WAN port LAN port * This product is used indoors only. * The product appearance shown in this document is for your reference only. The actual product appearance prevails...
- Page 5 Reset button factory defaults. Used for Wi-Fi pairing. When you respectively press the WPS button in the WA8011V and router within 2 minutes, network connection is WPS button established between the 2 devices. When pairing succeeds, the WA8011V can be freely removed and reinstalled and no more pairing is required.
-
Page 6: Specification
Parameter Item Specification System power supply 100–240 V AC, 50/60 Hz ≤ 6.5 W Typical power consumption 0°C to 40°C (32°F to 104°F) Ambient temperature Ambient humidity 5%–95% (non-condensing) Dimensions (H x W x D) 130 mm x 65 mm x 45 mm (without external antennas) <... - Page 7 Press the WPS button for connection (this mode is recommended if your router supports WPS). A. Insert the WA8011V into a power socket near the router, and then press its WPS button and hold for 3s to 10s. B. Within 2 minutes, press the WPS button on the router.
- Page 8 Use a smartphone to connect the WA8011V to a wireless network (this mode is recommended if your router does not support WPS). A. Check the Wi-Fi name and password on the nameplate. Insert the WA8011V into a power socket near the router, and connect a smartphone to the WA8011V through Wi-Fi.
- Page 9 Fast Setting Upstream Configuration Home Page User Name: Bridge Password: Transforms your existing wired network to a wireless network. Log In Exit Skip Save Note: When the segment-1 indicator turns green on, the WA8011V has been connected to the wireless network.
- Page 10 Current network connection mode: Please change your login password xxxxxxxx Wi-Fi User Name: root Settings You can navigate to the home page Old Password: SSID: XXXXXXX and start using the Huawei terminal. New Password: Password: Encrypt: XXXXXXX Confirm Password: Quit Next Re-scanning Skip...
- Page 11 1. You can also use a PC or tablet to complete configuration. 2. If you use Huawei wireless router where the latest version of software is installed (For details, ask your service provider.), the WA8011V automatically synchronizes the Wi-Fi name and password of the router.
- Page 12 LAN2 LAN1 WAN port Internet Upstream Note: 1. For the Wi-Fi name and password, see the WA8011V nameplate. 2. To ensure normal network extension, do not connect the LAN port of the WA8011V to the LAN port of a router.
-
Page 13: Changing The Wi-Fi Password
WPA PreSharedKey: wireless password of the router, to change the password, see the method described for the router. 2. If you cannot access the web page of the WA8011V using Apply Skip the IP address on the nameplate, power off the upper-layer gateway connected to the WA8011V, restart the WA8011V, and try again. -
Page 14: Description Of Indicators
WA8011V Status Description Yellow: steady on The WA8011V is starting. In upstream Wi-Fi transmission, the WA8011V is not connected to a Wi-Fi network. Red: steady on In Ethernet upstream transmission, the WA8011V 3-segment is not connected to an upper-level device or an IP address cannot be obtained. - Page 15 LAN port of the primary gateway 3-segment and obtains the IP address. indicators After successfully connected to Ethernet or a Green: Wi-Fi network in the upstream direction, the Blinking quickly WA8011V serves as an AP and is performing (twice per second) WPS pairing.
-
Page 16: Disposal And Recycling Information
This device and any electrical accessories are compliant with local applicable rules on the restriction of the use of certain hazardous substances in electrical and electronic equipment, such as EU REACH, RoHS and Batteries (where included) regulations, etc. For declarations of conformity about REACH and RoHS, please visit our web site www.huawei.com/en/product-certification. - Page 17 What can I do if WPS pairing fails? The WPS function of the WA8011V is enabled by default. You can log in to the web page of a router and ensure that the WPS function of the router is enabled.
-
Page 18: Warranty Card
Warranty Card Thank you for choosing Huawei Technologies Co., Ltd. To get better services, please read this warranty card carefully, fill in the required information, and preserve this card in good condition. User Information Personal or Company's full name: Address/Postal Code:... -
Page 19: Limited Warranty
In any case that is not covered by this limited warranty or should the warranty expire, Huawei shall charge for the service(s) claimed for the products if the product is still remediable. Huawei reserves all rights to interpret this limited warranty. - Page 20 Visit http://www.huawei.com for more information. Copyright © Huawei Technologies Co., Ltd. 2019. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd.