Cleaning And Care - BRAYER BR1122 Instruction Manual

Hide thumbs

Table of Contents

Available languages

symbols "13:00" will appear on the Display (15), and

after a while the Display (15) will show the current

time.

Notes:

- while in the delayed start mode the time

configuration functionality is not available.

- to exit the Program Mode set the Knob (13) to

"ТАЙМЕР", and press the Knob (13) once

- to change the switch on time repeat the coffee

maker switch on time setting steps described

above.

• The coffee maker will switch on at the preset time

and the indicator (18) will light up.

• If you don't switch the coffee maker after making

coffee by pressing the on/off button (19) «ВКЛ/

ВЫКЛ», it will switch off in 40 minutes.

DESCALING

• Clean the coffee maker from scale regularly.

• You can use «homemade descaling agent» - citric

acid solution in proportion 100 portions of water per 3

portions of citric acid.

• Open the lid (6), fill the water tank (7) with the

descaling agent up to the maximal mark on the water

level scale (8).

• Make sure that the filter holder (4) and the filter (5)

are installed to their places and there is no ground

coffee in the filter (5).

• Put the flask (1) on the tray (10).

• Switch on the Coffee Maker by setting the Knob

(13) to "ВКЛ/ВЫК, press the Knob (13) - the Light

Indicator (14) will turn red.

• Switch the Coffee Maker off by pressing the Knob

(13) again.

• Wait 15-20 minutes and switch the coffee maker on.

Wait until there is no descaling agent in the water

tank (7).

• Switch the coffee maker off and pour the liquid out of

the flask (1).

• After descaling, wash the coffee maker thoroughly. To

do this, pour pure water into the tank (7) and switch

the unit on without adding ground coffee in the filter

(5).

• Repeat the washing cycle several times.

Note: - to remove the scale you can use special

descaling agents for coffee makers and coffee

machines, strictly following the instructions on their

usage.