Cleaning And Care; Delivery Set; Technical Specifications - BRAYER BR1125 Instruction Manual

CLEANING AND CARE

• Always switch the coffee maker off and unplug it
before cleaning.
• Let the coffee maker cool down completely and clean
the outer surfaces of the unit body (4) with a soft,
slightly damp cloth, then wipe dry.
• Use soft detergents to remove dirt; do not use metal
brushes, abrasive detergents and solvents.
• Wash the removable parts ( 2, 8, 21, 23) with warm
water and neutral detergent, rinse and dry, install the
filter ( 8), close the lid ( 7).
• Do not immerse the coffee maker, the power cord
and the power plug into water or any other liquids.
STORAGE
• Before taking the coffee maker away for long storage,
unplug it and let it cool down completely.
• Clean the coffee maker.
• Keep the coffee maker in a dry cool place out of
reach of children and disabled persons.

DELIVERY SET

• Coffee maker – 1 pc.
• Travel container – 1 pc.
• Heat-resistant stand – 1 pc.
• Measuring spoon – 1 pc.
• Instruction manual – 1 pc.

TECHNICAL SPECIFICATIONS

• Power supply: 220-240 V, ~ 50-60 Hz
• Rated input power: 900 W
• Water tank capacity: 1,25 l
RECYCLING
To prevent possible damage to the environment
or harm to the health of people by uncontrolled
waste disposal, after expiration of the service
life of the unit or the batteries (if included), do
not discard them with usual household waste,
take the unit and the batteries to specialized
stations for further recycling.
The waste generated during the disposal of products is
subject to mandatory collection and consequent disposal in
the prescribed manner.
For further information about recycling of this product apply
to a local municipal administration, a household waste
disposal service or to the shop where you purchased this
product.
The manufacturer reserves the right to change the
design, structure and specifications not affecting general
operation principles of the unit, without prior notice.
The unit operating life is 3 years
The manufacturing date is specified in the serial number.
In case of any malfunctions, it is necessary to apply promptly
to the authorized service center.
EN 13