Cleaning And Care - BRAYER BR1124 Instruction Manual

10 EN
Notes:
- while in the delayed start mode the time
configuration functionality is not available.
- to exit the Program Mode set the Knob (13) to "ТАЙ-
МЕР", and press the Knob (13) once
- to change the switch on time repeat the coffee maker
switch on time setting steps described above.
• The coffee maker will switch on at the preset time and
the indicator (18) will light up.
• If you don't switch the coffee maker after making coffee
by pressing the on/off button (19) « », it will switch off
in 40 minutes.
DESCALING
• After 100 coffee brewing cycles, it is necessary to
descale the coffee maker, and the indicator (18) will
flash orange.
• Use a «household descaling agent» which is a solution
of citric acid in a ratio of 100 parts water to 3 parts citric
acid.
• Open the lid (8), fill the tank (9) with descaling agent up
to the maximum level on the water level scale (10).
• Make sure that the filter holder (6) and the reusable
filter (7) are in place and that there is no ground coffee
in the filter (7).
• Put the flask (2) on the tray (1).
• Press the button (19) « », the indicator (18) will glow
constantly.
• In the descaling mode, the heating element of the
coffee maker will switch on for 9 seconds at intervals
of 15 seconds during 10 minutes.
• After 10 minutes, the indicator (18) will flash and the
heating element of the coffee maker will switch off for
40 minutes.
• After 40 minutes, the indicator (18) will light up and
glow constantly, the heating element of the coffee
maker will switch on.
• Wait for the descaling agent to drain completely, the
indicator (18) will switch off and the number of coffee
brewing cycles will be reset to zero.
• Remove the flask (2) from the coffee maker and pour
the liquid out of it.
• Fill the tank (9) with clean water and switch the coffee
brewing mode on to rinse the coffee maker from the
descaling agent.
• Repeat the washing cycle several times.
Note: to remove the scale you can use special
descaling agents for coffee makers and coffee
machines, strictly following the instructions on their
usage.

CLEANING AND CARE

• Always switch the coffee maker off and unplug it
before cleaning.
• Let the coffee maker cool down completely and clean
the outer surfaces of the unit body (11) with a soft,
slightly damp cloth, then wipe dry.