Menu Structure And Navigation - Canton Sound M Operating Instructions Manual

Table of Contents

Menu Structure and Navigation

Overview

Most settings of the Sound M are included into the main menu� This settings menu is controlled by the infrared remote control delivered with the

device� The settings menu is displayed by the OSD (On Screen Display)� The LED display in the Soundbar shows the respective function in the form

of an abbreviation when the menu is activated� This means that the Soundbar can also be adjusted without a screen� Below, please find an instruc-

tion how to navigate through the menu:

• To enter the menu, press the "M" button�

• To enter the next menu level, press the "OK" button�

• To navigate upwards or downwards in the menu, press the Up

• To change the value of a parameter, press the "+" (Volume +) or "-" (Volume -) button�

• To enter the previous menu level, press the "M" button�

• To exit the menu:

a) Either press and hold the "M "button until the selected input (e�g� TV) is displayed, or

b) wait for 30sec without pressing any button on the remote control�

Practical tip:

To change the language of the On-screen display from German to English, please go to the main menu by pressing the button „M"�

Under „Systemeinstellung" [SYS] select the menu item „Display setup" [UI] and change the language under the menu item „Sprache" [LAN]�

" "

or Down " " key�

English

3 1 7

Table of Contents