Setting Up The Remote Control - Canton Sound M Operating Instructions Manual

English
Unpacking
Unpack the box carefully and check that all the following parts
are present:
Lieferumfang:
• 1x Sound M
• 1x Smart-remote
• 1x Power cable
• 1x High-Speed-HDMI®-cable (3m)
• 1x Optical digital Audiocable (1�5m)
• 1x Short manual
• 4x Equipmentfeet large (20mm)
• 4x Equipmentfeet small (12mm)
Anschließen
Place the Sound M in the desired location and connect it to the
power input using the power cord� Make sure that your TV is
plugged in�
10
Running in
Running-in phase until the development of the
maximum sound properties: 15 - 20 operating hours.
• Please listen at normal volume during this time
• Avoid extremely high levels
• Listen to a variety of audio material
Setting up the
remote control
The remote control comes with a
battery already installed� Simply
remove the protective film to
activate� When replacing the
battery ensure that it is correctly
inserted according to the polarity
markings (+/–)�
Only use the battery specified for
this system (CR 2032)�
OPEN CLOSE
CR 2032