Table of Contents
Advertisement
English
1. Speaker setup [SPS]
The first item in the settings menu is the Speaker Setup� Here you can make sound-relevant settings relating to the connected speakers�
This Speaker Setup includes the menu items:
• Channel Level [CHL]
• Speaker Distance [DST]
• Voice Clarity [VOI]
• Speaker EQ [EQ ]
• Sound Setup [SND]
Channel Level [CHL]
At the Channel Level menu you can adjust the volume level of each individual channel in 1dB (1 Decibel) steps between -10dB and +10dB, where 0dB
is the factory setting� For an easier relative volume adjustment between the different speakers, the Soundbar is equipped with a
test tone generator�
Caution: Before activating the test tone generator, please set the main volume to a level between 20 and 30� The test tone generator is depending on the
main volume level and cannot be increased or decreased within the menu�
For adjusting the relative volume of the different (virtual) speakers, please follow below instructions:
Press the menu button "M" on the remote to enter the menu�
1
Enter the first menu item Speaker Setup [SPS] by pressing the "OK" button�
2
Enter the menu Channel Level [CHL] by pressing the "OK" button�
3
As first item, Test Tone [TON] is selected automatically� Press the "OK" button if you want to activate the test tone generator�
4
Select [ON] to activate the test tone generator using the "+" button, select [OFF] to disable it using the "-" button�
5
Now, the front left [FL] speaker generates a pink noise signal� Press the "M" button and then the Down key " ", or directly the Down key "
6
front [FL] speaker from the speaker list�
Use the "+" resp� the "-" button to change the volume level� Go back to the speaker selection list by pressing the "OK" button�
7
In addition to the front left [FL] speaker you can adjust the virtual center [VCE] speaker, the front right [FR] speaker, the virtual surround right [VSR] and
8
surround left [VSL] speaker as well as the subwoofer [SUB]�
You can find additional information in the description in the "Sub output" and "Wireless speaker pairing" part�
18
"
to select this left
Advertisement
Table of Contents
