Table of Contents
Advertisement
English
To activate respectively deactivate the function, please do as follows:
To enter the menu, press the "M" button�
1
Enter the first menu item Speaker Setup [SPS] and press the "OK" button�
2
Use the
" "
or " " button to navigate to the item Voice Clarity [VOI] and confirm with the "OK" button�
3
Use the "+" or "-" button to activate resp� deactivate the "Voice" function�
4
On [ON] = Function actiated
Off [OFF] = Function deactivated
Press the "M" button to exit this menu item�
4
EQualizer (Eq)
The Equalizer menu allows you to select three different equalizers for the Soundbar [FLR], resp� the (connected) surround left and right [SLR], as well
as the subwoofer [SUB] to match the room conditions� Only physically available speakers are displayed�
To change the equalizer settings please do the following:
To enter the menu, press the "M" button.
1
Use the
" "
or " " button to navigate into the menu Speaker Setup [SPS] and press the "OK" button to confirm�
2
Use the
" "
or " " button to navigate to the menu Equalzier [EQ ] and confirm with the "OK" button�
3
Use the "+" or "-" button to select desired loudspeakers and change the EQ using the "+" or "-" button�
4
• EQ1 for installation in or on top of an open shelf resp� cupboard (factory setting)�
• EQ2 for an installation on top of a closed shelf resp� cupboard�
• EQ3 in case of the Sound M mounted to a wall�
Press the "M" button to exit this menu item�
5
Sound Setup [SND]
In this menu you can adjust the tone control settings for bass, mid and treble� These adjustments are identical to the ones that can be made using
the Sound-button on the Smart remote�
To adjust the settings for the tone control settings, please do as follows:
To enter the menu, press the "M" button�
1
Enter the first menu item Speaker Setup [SPS] and press the "OK" button�
2
Use the
" "
or " " button to navigate to the item Sound Setup [SND] and confirm with the "OK" button�
3
Use the
" "
or " " button to navigate to the paramter you want to adjust and use the "+" or "-" button to select the desired gain given in dB�
4
Press the "M" button to exit this menu item�
4
20
Advertisement
Table of Contents
