Input Select [Sel] - Canton Sound M Operating Instructions Manual

Manual (44 pages)

Table of Contents

You can change the default assigned name of an input to suit your actual connected source device� It is also possible to deactivate (physical) inputs so that they

are no longer displayed when switching through, which allows a faster selection of the input� The name for the input BT (Bluetooth

To change the name and/or deactivate the input proceed as follows:

To enter the menu, press the "M" button.

Use the

" "

or " " button to navigate into the menu System Setup [SYS] and confirm with the "OK" button�

Select the item Input Config [INP] using the

Then select the wanted inputy with the

You can choose from the following predefined designations using the "+" or "-" button:

" - - - " (input disabled), TV, BDB, SAT, CD, DVD, CAM, REC, PAD, POD, TAB, TUN, DAB, PS, VCR, ATV, PC, AUX�

After selecting the name, press the "OK" button� �

To assign a name to another input, repeat steps 4 to 6�

To leave this menu item, press the "M" button�

Caution:

• Should you assign a name to an input that is already assigned, the input previously assigned with this name will be deactivated (" - - - ")�

To continue using this input, you must assign a different name� Each source name can be assigned only once�

Notes:

• Inputs which have been deactivated " - - - " are no longer displayed when selecting the inputs (input buttons

This simplifies the selection of the desired input�

• The name for the Input [BT] (Bluetooth

Input Select [SEL]

If the Input Select function is set to Auto [AUT], the Sound M automatically changes to the optical, coaxial, analog resp� BT input as soon as the sig-

nal disappears at the currently selected signal input and an input signal is detected at one of the other inputs of the Soundbar�

If Manual [MAN] is selected, the inputs must be selected manually via the remote control using the " " or " " button�

By default this function is deactivated�

" "

or " " button and confirm with the "OK" button�

" "

or " " button and press the "OK" button�

) can not be changed�

English

) can not be changed�

" "

or " ")�