Lifting The Equipment; Storing The Equipment - Halton Rex Expander Installation And Maintenance Manual

Halton Rex Expander (RXP) - Installation, commissioning, and maintenance guide

3.5 Lifting the equipment

Note: For information on the weight of the product, see
When you take the product out of the box, do not lift the product by the pipes, as they damage easily, which leads
to leaking coils.

3.6 Storing the equipment

Protecting against moisture
The pallets onto which the products are stored enable air circulation inside the plastic wrappings. It is a strict
requirement that the products be stored in a dry indoor environment. Products must be protected against moisture
in any junction box or other closed enclosures. A dry indoor environment should not create moisture in junction
boxes, however, if necessary, additional moisture protection such as Silica Gel can be installed to the junction
boxes by the BUYER.
1. Store the products in a dry indoor area. Provide adequate mechanical protection at all times during storage
and during installation and construction activities.
2. Periodically check the products for any damage and repair or replace any component, wiring or piping that
shows signs of damage.
1.0
PERSONAL INJURY HAZARD
Do not lift objects over 20 kg (44 lbs) alone. Use a lift or seek assistance.
NOTICE
Do not expose the products to weather or store them outside.
NOTICE
Do no use any part of the products for climbing or support.
All rights reserved ©Halton
CAUTION
Dimensions and weight.
NOTICE
NOTICE
13