Playing An Md Right Away - Sony MZ-N1 Operating Instructions Manual

2 Make connections.
1 Insert a disc into the recorder.
2 Insert a rechargeable battery into the
recorder.
3 Connect the AC power adaptor to the
USB cradle.
4 Connect the recorder to your computer
with the supplied dedicated USB cable.
5 Release HOLD and place the recorder
(while stooped) on the USB cradle.
Notes
• Make sure to connect the AC power adaptor
to the USB cradle and the AC adaptor to a
wall outlet.
• The recorder supports USB 2.0 (previously
USB 1.1).
• Use of this recorder with a USB hub or a
USB extension cable is not guaranteed. Make
sure to use the USB cable for connection.
• Connect only one MD recorder to your
computer. If more than one recorder is
connected, normal operation is not
guaranteed.
3 Record audio data to the OpenMG
Jukebox.
4 Transfer the music file to the recorder
(Check-out).
Notes
• Only the VOLUME +/– button on the recorder
and the VOL +/– control and the SOUND
button on the remote control can be used when
the recorder is connected to your computer.
• Make sure not to touch the recorder or
disconnect the AC power adaptor while
checking out, as this may cause the data
recorded up to that point to be lost.
• While the recorder is connected to your
computer, the lid will not open during
editing operations.
5 Remove the recorder from the OpenMG
Jukebox.
Make sure not to remove the recorder
from the USB cradle until "TOC Edit"
disappears in the display.
Note
Before changing the disc, first stop the
recorder and remove it from the USB cradle. If
the rechargeable battery is not inserted in the
recorder at this time, the recorded or edited
contents may not be saved to the disc, or you
may not be able to take the disc out. Make
sure the rechargeable battery is inserted before
placing the recorder onto the USB cradle.
BMD playing

Playing an MD right away!

See the illustrations in Japanese text (page 25).
If you want to use the rechargeable battery,
be sure to recharge them before playing
(page 88).
1 Insert an MD.
1 Slide OPEN to open the lid.
2 Insert an MD with the label side
facing front, and press the lid to close.
2 Start playing.
1 Press N on the recorder. Turn the
control towards N> on the
remote control.
A short beep sounds in the
headphones/earphones.
2 Press VOLUME +/– on the recorder
to adjust the volume. Pull and turn
the control towards VOL + or
towards VOL – on the remote control.
To stop play, flip the bar towards x.
After you flip the bar towards x to stop, the
recorder will automatically turn off in about
10 seconds (when using batteries) or about 3
minutes (when using AC power adaptor).
Playback starts from the point you last
stopped playing. To start playback from the
beginning of the disc, press N for 2 seconds
or more on the recorder, or turn and hold the
control towards N> for 2 seconds or more
on the remote control.
To Do this
Select the track Turn the jog dial and
directly viewing press to enter.
the track number
or name.
Find the Press .. Turn the
beginning of the control towards . on
1)
current track the remote control.
Find the Press >. Turn the
beginning of the control towards N>
next track 2) on the remote control.
Go backwards Keep pressing ..
while playing Turn and hold the
control towards . on
the remote control.
Continued 99