Erasing A Track; To Erase A Group - Sony MZ-N1 Operating Instructions Manual

Erasing tracks or groups
See the illustration in Japanese text (page 62).
You can quickly erase recorded tracks, all
the tracks and data of the MD, or groups.
Note that once a recording has been
erased, you cannot retrieve it. Make
sure of the contents you are erasing.
Note
You cannot erase tracks that have been
checked out from your computer. You cannot
erase a group or an entire disc if it contains a
checked-out track. In this case, check in the
track or tracks to OpenMG Jukebox.

Erasing a track

On the recorder
1 While playing the track you want to
erase, press the jog dial.
2 Turn the jog dial repeatedly until
"EDIT" flashes in the display, and then
press to enter.
3 Turn the jog dial until "
flashes in the display, and then press to
enter.
"Erase OK?" and "PushENTER"
appear in the display.
4 Press the jog dial to enter.
The track is erased and the next track
starts to play. All the tracks after the one
erased are automatically renumbered.
On the remote control
1 While playing the track you want to
erase, press DISPLAY for 2 seconds or
more.
2 Turn the control repeatedly until "EDIT"
flashes in the display, and then press x
to enter.
3 Turn the control repeatedly until "Track
Erase" flashes in the display, and then
press x to enter.
4 Press x to enter.
To erase a part of a track
Add track marks at the beginning and the
end of the part you want to erase, then
erase the part.
118
Erasing a whole disc
1 While the recorder is stopped, press the
2 Turn the jog dial until "EDIT" flashes in
3 Turn the jog dial until "
4 Press the jog dial to enter.

To erase a group

1 Press GROUP for 2 seconds or more to
2 Follow steps 1 and 2 of the procedure
: Erase"
3 Flip the bar towards x.
4 Press the jog dial, turn the dial until
5 Turn the jog dial until "
6 Press the jog dial again.
To cancel moving
Press CANCEL on the recorder.
Press DISPLAY for 2 seconds or more on the
remote control.
jog dial.
the display, and then press to enter.
flashes in the display, and then press to
enter.
"AllErase?" and "PushENTER" appear
in the display.
"TOC Edit" flashes in the display, and
all the tracks will be erased.
When erasing is complete,
"BLANKDISC" flashes and "00:00"
appears in the display.
turn the group mode on.
described under "On the recorder" in
"Selecting and playing desired groups
(Group Skip Mode)" (page 106) to check
the contents.
"EDIT" flashes in the display, and then
press the dial again.
flashes in the display, and then press the
jog dial.
The group name, "GP Erase?" and
"PushENTER" appear in the display.
The group is erased.
: Erase"
: Erase"