To Release A Group Setting; Moving Recorded Tracks - Sony MZ-N1 Operating Instructions Manual

2 While the recorder is stopped, press the
jog dial.
3 Turn the jog dial until "EDIT" flashes in
the display, and then press to enter.
4 Turn the jog dial until "
the display, and then press to enter.
5 Turn the jog dial until the number or
name of the desired first track flashes in
the display, and then press to enter.
This selects the first track of the new group.
Even when the group mode is on, track
numbers appear according to their order
on the disc, not their order within the
group.
6 Turn the jog dial until the number or
name of the desired last track flashes in
the display, and then press to enter.
This selects the last track of the new group.
7 Follow steps 4 to 8 of "Labeling
recordings" (page 110) to label a group.
On the remote control
1 Follow the procedure of "To activate the
group mode" (page 102) to turn the
group mode on.
2 While the recorder is stopped, press
DISPLAY for 2 seconds or more.
3 Turn the control repeatedly until "EDIT"
flashes in the display, and then press x
to enter.
4 Turn the control repeatedly until
"Group Set" flasehs in the display, and
then press x to enter.
5 Turn the control repeatedly until the
number or name of the desired first
track flashes in the display, and then
press x to enter.
6 Turn the control repeatedly until the
number or name of the desired last track
flashes in the display, and then press x
to enter.
7 Follow steps 5 to 7 of "On the remote
control" in "Labeling recordings" (page
111) to label a group.
Notes
• In step 5, the first track must be either the
first track of an existing group or a track that
does not belong to a group.
• When selecting the last track in step 4, make
sure the track comes after the one selected in
step 5. The last track must be either the last
track of an existing group or a track that
does not belong to a group.
: Set" flashes in

To release a group setting

See the illustrations in Japanese text (page 57).
On the recorder
1 Press GROUP for 2 seconds or more to
turn the group mode on.
2 Select a group that you want to release and
check the contents ("Selecting and playing
groups (Group Skip Mode)" (page 106)).
3 Flip the bar towards x.
4 Press the jog dial.
5 Turn the jog dial until "EDIT" flashes in
the display, and then press to enter.
5 Turn the jog dial until "
flashes in the display, and press to enter.
"Release?" and "PushENTER" appear in
the display.
6 Press the jog dial to enter.
The group setting of the selected group
is released.
On the remote control
1 Follow the procedure of "To activate the
group mode" (page 102) to turn the
group mode on.
2 Select a group that you want to release
and check the contents (see "Selecting
and playing groups (Group Skip Mode)"
(page 106)).
3 Press x.
4 Press DISPLAY for 2 seconds or more.
5 Turn the control repeatedly until "EDIT"
flashes in the display, and then press x
to enter.
6 Turn the control repeatedly until
"GroupRelease" flasehs in the display,
and then press x to enter.
7 Press x to enter.

Moving recorded tracks

See the illustrations in Japanese text (page 58).
You can change the order of the recorded
tracks.
On the recorder
1 While playing the track you want to
move, press the jog dial
2 Turn the jog dial until "EDIT" flashes in
the display, and then press to enter.
: Release"
Continued
115