Relabeling Recordings - Sony MZ-N1 Operating Instructions Manual

To cancel labeling in
the letter input area.
1)
Functions of the buttons and control may differ
depending on where the cursor is in the letter
input area or the character palette.
2) If phrases are stored in the name bank, the
first phrase stored appears in the display
(page 112).
7 Repeat step 6, and then enter all
characters of the label name.
8 Press down the jog dial for 2 seconds or
more.
The disc is labeled.
On the remote control
1 Insert a disc.
See step 1 of "On the recorder" to check
the varieties of name you can label (page
110).
2 Press DISPLAY for 2 seconds or more.
3 Turn the control repeatedly until "EDIT"
flashes in the display, and then press x
to enter.
4 Turn the control repeatedly until the
following item appears in the display,
and then press x to enter.
When labeling a track: "Track Name"
When labeling a group: "Group Name"
When labeling a disc: "Disc Name"
5 Turn the control repeatedly to select a
letter and press x to enter.
The selected letter stops flashing and the
cursor moves to the next input position.
Functions
To switch between
katakana, capital letters,
small letters, numbers/
symbols and phrases
To move the cursor to
the left or right.
To change the letter to
the one before/next one.
To insert a blank space
to type in a new letter.
To cancel labeling.
To delete a letter and
move back all following
letters to the left.
Press CANCEL.
Operation
Press X
1)
.
Pull and turn the
control (VOL +/–).
Turn the control
(./N>).
Press DISPLAY.
Press DISPLAY
for 2 seconds or
more.
Pess PLAY MODE.
1)
If phrases are stored in the name bank, the
first phrase stored appears in the display
(page 111).
6 Repeat step 5 and enter all characters of
the label name.
7 Keep pressing x for 2 seconds or longer.
The track or disc is labeled.
To cancel labeling
Press CANCEL on the recorder.
Press DISPLAY for 2 seconds or more on the
remote control.
Notes
• When the recording is stopped while labeling a
track, a group, or a disc during recording, or
when the playback moves on to the next track
while labeling a track during playback, the input
at that point is entered automatically.
• "LP:" has automatically been added at the
beginning of the track names for tracks recorded
in MDLP mode.
• You cannot label or relabel the premastered disc.

Relabeling recordings

On the recorder
1 Insert a disc and do the following.
To relabel a track:
Start playing a track you want to relabel,
and change a track name while the
recorder is playing.
To relabel a group:
Turn the group mode on (page 102) and
start playing or recording a track within
the group you want to relabel, and
change the group name while the
recorder is playing or recording.
To relabel a disc:
Relabel the disc while the recorder is
stopped or recording.
If you relabel a disc with group settings,
turn the group mode on (page 102).
2 Follow steps 2 to 4 of "Labeling
recordings" (page 110) to display a track,
group, or disc name
3 Follow steps 5 to 8 of "Labeling
recordings" (page 110), and then keep
pressing the jog dial for 2 seconds or
more.
111