Playing Mds; Playing An Md - Sony MDS-JB940 Operating Instruction

Playing MDs
This chapter explains the various ways
to play MDs.
Playing an MD
1 Turn on the amplifier and select MD on the
amplifier.
2 Press 1/0) to turn on the deck.
ns off
4 it necessary, turn AMS (or press PI repeatedly) to
locate the track you want to start playing from.
If you want to play from the f i r s t track, skip this step
and go to step 5
5 Press
The deck starts to play
6 Adjust he volume on the amplifier.
Operations you may want to do during play
AMS clockw
repeatedly)
[xsi he Begining of he]
MS counterclockwise (oF
ck or a preceding | AM sie
press Ke repeatedly)
o p i n g pi
T when you play an MD recorded in LP2 or LP4 Stereo
mode
The MD LP in ns up when you press D> in step $
ane
Ë To use headphones
Connect them to the PHONES jack. Tum PHONE LEVEL (or
© You can adjust the analog signal level output to the
ANALOG OUT jacks and the PHONES jack
1 While the deck is playing. press DISPLAY/CHAR (or
DISPLAY) repeatedly unt
appear.
2 Press REC LEVEL/ANALOG OUT LEVEL +/- on the
remote repeatedly 10 adjust the output signal lew
ut adjustment display
Playing an MO | 23 55