Turning Off The Beep Sound - Sony MZ-N1 Operating Instructions Manual

Storing the settings for
individual discs (Personal Disc
Memory)
See the illustrations in Japanese text (page 68).
The recorder can store the various settings
for each disc, and then retrieve them
automatically whenever the disc is
inserted. Do the following procedure to
store the volume, playback mode, group
mode playback, playback order, sound
quality (Digital Sound Preset), and
playback speed (Speed control) settings for
a disc.
On the recorder
1 While the recorder is stopped, playing,
or play-paused, press to enter.
2 Turn the jog dial until "PERSONAL"
flashes in the display, and then press to
enter.
"Entry?" flashes in the display.
3 Press the jog dial.
"Entry OK" appears in the display and
the disc settings are stored in the
recorder.
On the remote control
1 While the recorder is stopped, playing,
or play-paused, press DISPLAY for 2
seconds or more.
2 Turn the control repeatedly until
"PERSONAL" flashes in the display,
and then press x to enter.
3 Press x to enter.
To erase information
On the recorder
In step 3, turn the jog dial until "Erase?"
flashes in the display, and then press to enter.
On the remote control
In step 3, turn the control until "Erase?"
flashes in the display, and then press x to
enter.
120
Notes
• The settings for up to 20 discs can be stored.
Any settings stored afterwards will replace
the settings for the least used disc among the
20.
• If you add tracks or perform an editing
operation (not including labeling) to a disc
whose settings have been stored on the
recorder, the disc will no longer be
recognizable by the recorder and the stored
information will become useless. In this
case, store the settings again.
• If you try to erase the disc information of a
disc that have never been stored, "No
Entry!" appears in the display for 2 seconds.

Turning off the beep sound

See the illustrations in Japanese text (page 70).
Using the recorder, you can turn off the beep
sound on the recorder and the remote control.
Using the remote control, you can turn off the
beep sound on the remote control only. To
turn off the beep sound by using remote
control, see "Menu functions" (page 95).
1 Press the jog dial.
2 Turn the jog dial until "OPTION"
flashes in the display, and then press to
enter.
3 Turn the jog dial until "BEEP" flashes in
the display, and then press to enter.
4 Turn the jog dial until "MAIN UNIT" or
"REMOTE" flashes in the display, and
then press to enter.
MAIN UNIT: when turning off the beep
sound on the recorder.
REMOTE: when turning off the beep
sound on the remote control.
5 Turn the jog dial until "BEEP OFF"
flashes in the display, and then press to
enter.
To turn on the beep sound
Select "BEEP ON" in step 5.