Sony MZ-N1 Operating Instructions Manual page 123

SORRY :
You tired to set Digital Sound Preset
while the "AUDIO OUT" parameter is
set to "LINE OUT." Use the jog dial to
set the "AUDIO OUT" parameter to
"HeadPhone."
You tried to erase a track mark while
playing the MD or at the beginning of
the first track.
You tried to erase a track mark to
combine tracks the recorder cannot
combine (a track recorded in different
recording mode such as in LP2 and
LP4, or a track recorded through
analog connection and digital
connection)*.
You tried to overwrite a track marrk.
You tried to flip the bar towards X (or
pess X on the remote control), T
MARK or REC MODE while synchro-
recording or the joint text function is
active.
* If you have recorded or erased many
times on the same MD, the data of a
single track may be scattered
throughout the MD. When the data is
scattered in groups of less than 12
seconds long, the recorder will not be
able to combine the tracks.
TEMP OVER :
Heat has built up in the recorder. Wait
until the recorder cools down.
TOC Edit :
The MD recorder is recording
information (track start and end
position) from the memory to the disc.
Wait until this process is completed.
Do not expose the recorder to physical
shock, nor disrupt power supply.
TOC ERR
The recorder cannot read the disc
information correctly. Insert another
disc. If it is no problem to erase all the
contents of the disc, erase all (page 64).
TR FULL:
You tried to record more than 254
tracks.
TrPROTECT :
You tried to record over or edit a track
which has been protected from being
recorded over*.
* Track-protected MiniDiscs — Some
MD recorders will let you protect
individual tracks from being recorded
over. This recorder, however, does not
offer this feature.
123