Table of Contents
Advertisement
GAS CONNECTION, OPTION 2
(UNITED KINGDOM ONLY, MODELS SUPPLIED WITH CONICAL/MALE PIPE
FITTING & OTHER EXTRA EU COUNTRIES)
GB
II
Cat:
The gas connection fitting (fig. 2.2) is made up of:
•
the floating nut;
•
the elbow;
•
the gaskets;
•
the conical pipe fitting - to be used for the United Kingdom only or if requested by the
applicable local regulations. In this case, before connecting the appliance to the gas
supply, fit the conical pipe fitting to the elbow interposing the gasket. If the conical pipe
fitting is not supplied with the appliance it can be purchased by contacting the After-
Sales Service.
The gas connection must be carried out by an authorised person according to the
relevant local standards.
•
If using a flexible hose, make sure it does not come into contact with moving parts.
•
The rear of the chassis is recessed to provide a channel for the appliance inlet pipe.
•
The gas connection fitting can be turned in the direction required (but never in a vertical
or horizontal position) after loosening the elbow and floating nut connection.
•
Never attempt to turn the elbow without having first loosened the floating nut.
•
The supplied gaskets guarantee a good seal for the gas connection. We recommend
that you replace the gaskets on the slightest sign of wear, deformation or imperfection.
•
After connecting to the gas mains, check that the couplings are correctly sealed, using
soapy solution, but never a naked flame.
ISO 228-1 (female)
IS O 228-1 (female)
1/2" G cylindrical
1/2" G cylindrical
C onical
Conical pipe
pipe
fitting
fitting
IMPORTANT !
IMP OR TANT !
The conical pipe fitting must be used
The c onic al pipe fitting mus t be
for the United Kingdom only or if
us ed for the United K ingdom only
requested by the applicable local
or if reques ted by the applic able
regulations.
loc al regulations .
If this conical adaptor is not
If this c onic al adaptor is not s upplied
supplied with the appliance it can be
with the applianc e it c an be purc has ed
purchased by contacting the After-
by c ontac ting the After-S ales S ervic e.
Sales Service.
2H 3+
ISO 7-1 (male)
IS O 7-1 (male)
1/2" G conical
1/2" G conical
ISO 228-1 (male)
IS O 228-1 (male)
1/2" G cylindrical
1/2" cylindrical
Elbow
E lbow
ISO 228-1 (male)
1/2" cylindrical
Gasket
G as ket
Fig. 2.2
Gasket
Floating nut
Floating nut
G as ket
Appliance
Appliance
inlet pipe
IS O 228-1 (male)
inlet
1/2" G cylindrical
pipe
Rigid pipe or
R igid pipe
flexible hose
or flexible hos e
17
17
Advertisement
Table of Contents
