16. Using the three bolts (1) removed earlier, secure the
exhaust shield (2) to its mounting bracket.
17. If equipped, connect the air compressor intake air tube
(1) to the engine intake air tube. Using the two hand,
two wrench method, tighten the fitting (2)
18. Connect the engine blow-by hose (3) to the air inlet
pipe to the turbocharger and engage the hose clamp.
Next operation:
Fill the coolant system. Refer to Engine cooling system - Filling (10.400)
Next operation:
Battery - Connect (55.302)
Engine - Cylinder heads
47533593 01/10/2013
10.2 [10.101] / 8
8
RCPH10CCH906AAB
9
RCPH10CCH061BAB