New Holland T8.275 Service Manual page 51

6. Relieve the tension on the accessory drive belt ten-
sioner (1) and install the drive belt (2).
7. Relieve the tension on the fan drive belt tensioner (3)
and install the drive belt (4)
8. Torque the bolts to 59 - 106 N·m (44 - 78 lb ft).
9. Install the holding plate (1) for the right rear engine
mount with the bolts (2) removed earlier.
10. Torque the bolts to 125 - 150 N·m (92.2 - 110.6 lb ft).
11. Clean any rust, corrosion and/or paint from the mount-
ing location (1) for the grounding cable at the left rear
engine mounting bracket (2). Also clean the bolt and
grounding cable.
12. Install the bolts (3) removed earlier, and torque to 125
- 150 N·m (92 - 111 lb ft).
13. Install the hood support bolt and washer (4) and torque
to 125 - 150 N·m (92 - 111 lb ft).
Engine - Engine and crankcase
47533593 01/10/2013
10.1 [10.001] / 25
4
RCPH10CCH076BAB
5
RCPH10CCH925AAB
6
RCPH10CCH080BAB