New Holland T8.275 Service Manual page 58

43. While holding the bolt, install the nut (1) and tighten.
Repeat for the opposite side.
44. Properly support the over head line bracket assembly,
and place the assembly over the top of the engine.
45. Using the four bolts (1) remove earlier, secure the rear
of the bracket to the hood support.
46. Secure the harness clamp (2) to the hood support.
47. At the right front cam mount bracket (1), clean any
paint, rust or corrosion from the ground connector lo-
cation (2).
48. Use the bolt (3) removed earlier to secure the ground
wire.
Engine - Engine and crankcase
47533593 01/10/2013
10.1 [10.001] / 32
27
RCPH10CCH913AAB
28
RCPH10CCH075BAB
29
RCPH10CCH918AAB
30
RCPH10CCH921AAB