New Holland T8.275 Service Manual page 63

73. Connect the opposite end of the elbow (4) to the tur-
bocharge. Tighten all intake air tube assembly hose
clamps.
74. Install new O-ring seals, and connect the hydraulic
oil cooler supply and return fittings (1). Tighten the
fittings using the two hand, two wrench method.
75. Install the fuel cooler supply and return hoses (2), and
secure with the hose clamps.
76. At the DEF/AdBlue supply module (1), engage the in-
let connector (2) and secure by pushing the locking
wire (3) inward.
77. Repeat for the outlet (not shown).
78. Connect the module harness connector (4).
Engine - Engine and crankcase
47533593 01/10/2013
10.1 [10.001] / 37
45
RCPH10CCH809AAB
46
RCPH10CCH066BAB
47
RCPH10CCH911AAB